Testbook Logo
Exams SuperCoaching Test Series Skill Academy
More
English
Hindi

Question

Download Solution PDF

Closed-loop system has higher _______ than open-loop control system and this implies increased speed of response.

This question was previously asked in
BPSC AE Paper 6 (Electrical) 25 Mar 2022 Official Paper
Download PDF Attempt Online
View all BPSC AE Papers >
  1. gain
  2. speed
  3. frequency
  4. bandwidth

Answer (Detailed Solution Below)

Option 4 : bandwidth
Free Tests
View all Free tests >
Free
BPSC AE General Studies Mock Test
4.3 K Users
20 Questions 40 Marks 25 Mins
Start Now

Detailed Solution

Download Solution PDF
  • The transfer function for a negative closed-loop is given by:

T.F.=G(s)1+G(s)H(s)

where G(s) = Forward path gain

H(s) = Feedback path gain

  • Due to the presence of a feedback path, the gain of the transfer function decreases.
  • As the gain-bandwidth product must be constant, hence bandwidth increases for decreasing value of gain.
  • As the transient response of the system is improved by the use of feedback and it causes the settling time to reduce and the closed-loop system has higher bandwidth than open-loop systems and this implies an increase in the speed of response.
Download Solution PDF
Latest BPSC AE Updates

Last updated on Jun 13, 2025

-> BPSC AE 2025 exam date has been revised. The exam will be conducted on July 17, 18 & 19 now. 

-> Candidates who were facing technical issues while filling form can now fill the BPSC AE application form 2025 without any issue. 

->BPSC AE age limit 2025 has been revised.

->BPSC AE application form 2025  was released on April 30. The last date to fill BPSC AE form 2025 was May 28. 

->BPSC AE interview call letters released for Advt. 32/2024.

->BPSC AE notification 2025 has been released. 

->A total of 1024 vacancies are announced through BPSC AE recruitment 2025

->The BPSC Exam Calendar 2025 has been released for the Assistant Engineer Recruitment.

-> The selection will be based on a written exam and evaluation of work experience.

-> Candidates with a graduation in the concerned engineering stream are eligible for this post.

-> To prepare for the exam solve BPSC AE Previous Year Papers. Also, attempt the BPSC AE Civil  Mock Tests.

More Time Domain Specifications Questions

Q1.In the circuit shown switch is closed at t = 0. The time constant of the circuit is :
Q2.Consider a causal second-order system with the transfer function G(s)=1s2+2s+1 with a unit-step R(s)=1s as an input. Let c(s) be the corresponding output. The time taken by the system output c(t) to reach 94% of its steady-state value limt→∞c(t), rounded off to two decimal places, is
Q3.The nature of the response shown below is:
Q4.When the damping ratio ζ (zeta) lies in between 0 < ζ < 1, then the circuit classification comes under:
Q5.The time required for the response curve to reach and stay within the specified 2-5% of final value is referred to as :
Q6.Consider a standard second order system given by wn2s2+2ζwns+wn2. The correlation between the maximum peak overshoot in the time domain and the resonant peak in the frequency domain exists when:
Q7.Consider the second order closed loop control system. If the characteristics polynomial is given by S2 + 3S + 2 = 0, then the control system is:
Q8.A second order system has only imaginary conjugate poles, what is the damping factor value for this system?
Q9.For a second order underdamped control system, the settling time for the 5% band is given by the equation:
Q10.Consider a standard second order system given by wn2s2+2ζwns+wn2. The speed of response is measured in time and frequency domain by:

More Time Response Analysis Questions

Q1.A unity feedback system is characterized by the open-loop transfer function G(s)=100s(5s+10)(2s+10) The steady-state errors for unit-step and unit-ramp inputs are :
Q2.In the circuit shown switch is closed at t = 0. The time constant of the circuit is :
Q3.Consider a causal second-order system with the transfer function G(s)=1s2+2s+1 with a unit-step R(s)=1s as an input. Let c(s) be the corresponding output. The time taken by the system output c(t) to reach 94% of its steady-state value limt→∞c(t), rounded off to two decimal places, is
Q4.The output of a standard second-order system for a unit-step input is given as y(t)=1−23e−tcos⁡(3t−π6). What is the transfer function of the system?
Q5.A second-order system has a closed-loop transfer function given by G(s)=25s2+8s+25. The settling time for 5 percentage band in tolerance error is
Q6.A second-order system has a transfer function given by G(s)=25s2+8s+25. If the system, initially at rest, is subjected to a unit-step input at t = 0, the second peak in the response will occur at
Q7.Steady state error is the value of error signal when:
Q8.A closed loop system is shown in the figure where k > 0 and α > 0. The steady state error due to a ramp input (R(s) = α/s2) is given by 
Q9.The nature of the response shown below is:
Q10.When the damping ratio ζ (zeta) lies in between 0 < ζ < 1, then the circuit classification comes under:
Suggested Test Series
View All >
71st BPSC CCE (Preliminary) Test Series 2025
222 Total Tests with 1 Free Tests
Start Free Test
BPSC ASO Mock Test Series 2025
108 Total Tests with   4 Free Tests
Start Free Test
Suggested Exams
Exam-Logo
DSSSB JE

DSSSB JE Important Links

More Control Systems Questions

Q1.A unity feedback system is characterized by the open-loop transfer function G(s)=100s(5s+10)(2s+10) The steady-state errors for unit-step and unit-ramp inputs are :
Q2.In the circuit shown switch is closed at t = 0. The time constant of the circuit is :
Q3.The loop transfer function of a closed-loop control system is given as : G(s)H(s)=k(s+1)s(s+2)(s+3) The centroid of the asymptotes in root locus is :
Q4.For a control system having fourteen poles and two zeros, the slope in its magnitude plot for high frequency asymptote will be :
Q5.The Routh Array is as below : S6182016S521216S421216S300 The row of zero of this array will be replaced by coefficients of 
Q6.The number of roots in the left half of the s-plane for a system having characteristic equations : s3 + 5s2 + 7s + 3 = 0 is : 
Q7.Explain the pattern and trend of public expenditure on social services in the post reforms period in India. To what extent this has been in consonance with achieving objective of inclusive growth? 
Q8.The Nyquist criterion for stability states that an amplifier is unstable if the Nyquist curve encloses the -1 + j0 point, and the amplifier is stable if the curve does not enclose this point. If Aβ
Q9.The phase margin of a system with the open-loop transfer function G(s)H(s)=1−s(s+1)(s+2) is
Q10.The phase margin of a system having the loop transfer function G(s)H(s)=23s(s+1) is
Important Exams
Super Coaching
Exams
Test Series
Previous Year Papers
Objective Questions
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
support@testbook.com
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Our Apps
Follow us on
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Get Free Access Now
Hot Links： teen patti cash game teen patti 3a teen patti game paisa wala