Testbook Logo
Exams SuperCoaching Test Series Skill Academy
More
English
Hindi

Question

Download Solution PDF

Parallel misalignment is present when

This question was previously asked in
ESE Mechanical 2021 Official Paper
Download PDF Attempt Online
View all UPSC IES Papers >
  1. two shafts are parallel to each other but are not in the same plane
  2. two shafts are parallel to each other and are in the same plane
  3. the shafts are not parallel to each other.
  4. the shafts are aligned with each other

Answer (Detailed Solution Below)

Option 2 : two shafts are parallel to each other and are in the same plane
Free Tests
View all Free tests >
Free
ST 1: UPSC ESE (IES) Civil - Building Materials
6.3 K Users
20 Questions 40 Marks 24 Mins
Start Now

Detailed Solution

Download Solution PDF

Explanation:

Parallel misalignment is present when the centre lines of both shafts are parallel but they are offset in same plane.

F1 Ashik Madhu 21.08.20 D8

Download Solution PDF
Latest UPSC IES Updates

Last updated on May 28, 2025

->  UPSC ESE admit card 2025 for the prelims exam has been released. 

-> The UPSC IES Prelims 2025 will be held on 8th June 2025.

-> The selection process includes a Prelims and a Mains Examination, followed by a Personality Test/Interview.

-> Candidates should attempt the UPSC IES mock tests to increase their efficiency. The UPSC IES previous year papers can be downloaded here.

More Coupling Questions

Q1.Which one of the following couplings is not a flexible coupling? 
Q2.The sleeve and muff coupling is designed as a
Q3.The railway carriage couplings have
Q4.The type of coupling used to join two shafts whose axes are neither in same straight line nor parallel, but intersect is ________.
Q5.The function of the universal joint is to allow the propeller shaft to:
Q6.The sleeve or muff coupling is designed as a -
Q7.Which of the following coupling working to joint two shafts with large angular misalignment?
Q8.Parallel misalignment is present when
Q9.The type of coupling used to join two shafts whose axes are neither in the same straight line nor parallel but interest is

More Shafts Keys and Couplings Questions

Q1.The forces experience by a Key used in a gear train for power transmission is
Q2.A key having a square cross-section of side d/4 and length l is used to transmit torque T from the shaft of diameter d to the hub of a pulley. Assuming the length of the key to be equal to the thickness of the pulley, the average shear stress developed in the key is given by
Q3.Which one of the following couplings is not a flexible coupling? 
Q4.The sleeve and muff coupling is designed as a
Q5.The railway carriage couplings have
Q6.The following coupling is used to connect two paralled shafts having small distance between the axes
Q7.A shaft carrying two rotors as its ends will have
Q8.In automobiles the power is transmitted from gear box to differential through
Q9.If T be the torque transmitted by a splined shaft splines at a mean radius of R, then shear force on each spline is
Suggested Test Series
View All >
UPSC ESE (IES) Civil Mock Test Series
116 Total Tests with 1 Free Tests
Start Free Test
UPSC ESE (IES) Prelims Paper 1 Mock Test Series
54 Total Tests with   1 Free Tests
Start Free Test

More Design of Machine Elements Questions

Q1.What will be the average pressure in plate clutch when the axial force is 4 kN. The inside radius of the contact surface is 50 mm and the outside radius is 100 mm. Assume uniform wear. 
Q2.In case of a flat pivot bearing, which of the following options is correct about the sliding friction? 
Q3.The bearing surface provided at any position along the shaft (but not at the end of the shaft) to carry the axial thrust, is known as ____________. 
Q4.What will be the power lost in friction assuming uniform pressure theory, when a vertical shaft of 100 mm diameter rotating at 150 r.p.m. rests on a flat end foot step bearing? The coefficient of friction is equal to 0.05 and the shaft carries a vertical load of 15 KN.
Q5.A bearing is designated by the number 410. It means that it is a bearing of:
Q6.Which of the following elements is not used as a roller in roller bearings?
Q7.In 6 × 19 designation of wire rope, the numbers of 6 and 19 represent :
Q8.Which of the following statements related to rope drives is INCORRECT?  
Q9.Under steady state operation of a cone clutch, if semi-cone angle (α) decreases then _____________.
Q10.A single riveted lap joint is made in 10 mm thick plates with 20 mm diameter rivets. Determine the bearing strength of the rivet if stresses in bearing is 150 MPa.
Important Exams
Super Coaching
Exams
Test Series
Previous Year Papers
Objective Questions
Testbook USA SAT Exam
Testbook USA ACT Exam
US College Admissions Guide
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
[email protected]
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Our Apps
Follow us on
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Get Free Access Now
Hot Links： teen patti dhani teen patti casino teen patti rummy 51 bonus teen patti go teen patti 500 bonus