The Q of an unknown coil using parallel connection measurement method can be calculated using which of the following equations.

Concept:

Q-meter is an instrument used for the measurement of the Q-factor of the coil as well as for the measurement of self-inductance, self-capacitance and resistance. There are three methods to connect the unknown impedance to the testing terminals of the Q-meter:

1. Direct Connection
2. Series Connection
3. Parallel Connection

Parallel Connection of Q-meter:

In a parallel connection, the unknown impedance/coil is connected in parallel with the tuning circuit as shown in the figure below.

Measurement procedure:

1. Before connecting the unknown impedance, the circuit is resonated and we get the values of the tuning capacitor and Q-meter as C₁ and Q₁ respectively.
2. After connecting the unknown impedance, the circuit is resonated and we get the values of the tuning capacitor and Q-meter as C₂ and Q2 respectively.

Results:

Solving using resonance equations, we get

 and 

Hence, Q of the unknown coil is obtained as

Additional Information

Series Connection of Q-meter:

Using the resonance conditions before and after connecting the load impedance, we get

 and  

Hence,